Alternator Repair

Rajamane Services Pvt Ltd is providing best Alternator Repair, Transformer Repair and DC Motor Repair with in India. An alternator is an electrical generator that converts mechanical energy to electrical energy in the form of alternating current.

Rajamane Services is one of the pioneers within the field of huge LT/ HT-AC/DC Generator repair services in India. We can handle all aspects of Generator/Alternator repair services from standards to customize. Rewinding of all genre of alternators up to 1000MVA, 13.8KV.

 

Alternator Repair

You know that your battery stores electricity – enough to start your engine and get you moving. But that's about it – you can only get a few miles on battery power alone. You need an alternator to generate enough electricity to run your engine and power your electrical accessories like the stereo, power seats, heater fan, on-board computers, and so on. On top of that, the alternator requirements to recharge your battery. So when your alternator isn't working properly, there isn't enough electricity for all of those things. 

The alternator is the element that charges the battery in your car. When you use electrical machinery in your car (stereo, lights, etc.), the battery loses power. The alternator recharges the battery, replenish the lost battery power. The alternator is located in the engine compartment. If the alternator is not working appropriately, your car will only stay running for as long as the battery has power stored. Once the battery loses power, your car will won’t start. Normally, a not working alternator will turn on the battery warning light or will have a low volt gauge reading.

 

Alternator Repair

The mechanic should verify the entire charging system before installing a new alternator, including checking battery cables for corrosion and the condition of the battery. Your alternator charges the battery, which powers the electronics in your vehicle, such as the radio and the air conditioning. The battery is also needed to turn on your vehicle. A not working alternator will not charge your car’s battery, and your vehicle will eventually run out of battery life and not be able to start.

When performing arts alternator repairs, the technician must simply pull the damaged or defective part out of the vehicle and replace it with a new one. Most commonly, technicians complete the starter and alternator replacement by removing the old hardware and parts using a socket set and other hand tools. The substitute parts quickly bolt into the engine bay in the exact same position as the old components.

For more details visit:

Alternator Repair 

Electrical motor repair

Rajamane Services Pvt Ltd is one all told the pioneers among the sector of huge LT/ HT-AC/DC electric motor repair services & mating  as most of the worldwide OE manufactures authorizing the company as their service partner in Asian country. With its state of the art facilities unfold across metropolis, Tumkur & Hubli.
 

Electric motor repair

Rajamane offers entire electric motor repair, rebuild, renew services, AC Motors services From standards to personalized. Rewinding of all genre of AC induction motors from FHP to 5000HP, voltage up to 13.8KV. Come by winding to fashioned coils each for stator coil and rotor.

Electric motor failures are often caused by “in-operation” factors, such as production activities and the factory environment in which they operate. Other failures are due to “off-line” factors, including inadequate or substandard motor repair practices, and improper motor shipping, storage, and installation. Compared with in-operation failures, those caused by off-line factors are much easier to eradicate — and represent an overlooked opportunity to improve electric motor reliability.
 

Electric motor repair

To capitalize on this chance, your company should evaluate and work with electric motor rebuilders based on their adherence to high-quality repair standards and practices. It's important to remember that the expertise, professionalism, and overall quality offered by electric motor repair companies can vary significantly from shop to shop — and also over time. Regardless of volume or location, however, expert repair shops share many of the same characteristics. When choosing a provider, look for the following traits:

• Maintains clean, orderly work areas and has a stable workforce of well-trained, technically proficient employees.
• Is fully equipped with state-of-the-art test equipment and instruments. Expert shops will calibrate their instruments annually to National Institute of Standards and Technology (or equivalent) standards to ensure the accuracy of repair readings and measurements.
• Adheres to a documented set of repair procedures. High-quality motor shops are procedure driven and never rely solely on the skills and experience of shop technicians. These providers have developed detailed procedures covering electric motor repairs and file each step of the repair process. This helps ensure your motors are repaired or rebuilt to documented mechanical and electrical standards every time, regardless of when repairs are made or who made them.
• Use high-quality replacement components procured through transparent supply channels. This alleviates customer concerns about obsolete or counterfeit components that may result in poor motor performance.

Repair procedures

Among other actions, the procedures followed by high-quality shops include conducting a stator core test before and after winding removal, as well as confirming that the core has not been damaged during the repair process. Core loss testing and “hot-spot” testing are vital when it comes to determining the condition of the AC induction motor stator iron integrity. Operational expenses and long-term stator winding reliability are the primary considerations. Core losses decrease the efficiency of electric motors and can increase a plant's utility costs.
For more details visit:

Electrical motor repair 

Electrical Motor Rewinding

An electric motor which converts electrical energy into mechanical energy. The reverse of this is the conversion of mechanical energy into electrical energy and is done by an electric generator.

In normal motoring mode, most electric motors function through the contact between an electric motor's magnetic field and winding currents to generate force within the motor. In certain applications, such as in the transportation industry with traction motors, electric motors can operate in both motoring and generating or braking modes to also produce electrical energy from mechanical energy.

Electric motor units perform a significant quantity of work in today’s world.  They maintain various kinds of electronic devices running and working properly. A variety of types of electric motors are used to make life a little easier however they can be expensive to replace.   Electric motor rewinding can be done to make the motor workable again without the high cost of paying for a new motor.

There are various reasons and factors when deciding to have a Electrical Motor rewound rather than purchasing a new one.  Rewinding an electric motor is delicate and professional care is needed.  Even a minuscule mistake throughout the rewinding process could result in a great loss.  Rewinding a motor is not a simple task and it is best to have a professional check out the motor and handle the rewinding process. Priest electric is a corporation with certified professionals to help you with rewinding your electric motor.

When a motor’s insulation is ruined or even just damaged the electricity begins transferring from winding to winding causing excess heat and damages the motor. Power problems can also result in motor damage.  Routine maintenance include rewinding when necessary will extend the life and productivity of an electric motor.

When the decision to rewind a motor the motor housing is first removed to expose the windings. Photographs and notes may be taken for documentation. The wire beginning the tabs on the brush pads is very carefully and completely removed. The wind free coils are then cut from the motor. The insulation shown is inspected to make sure if it is in good shape, or if it needs to be repaired or replaced. The armature is then rewound. The exact winding pattern is recreated and number of coils around each winding. The windings are connected and the wires are double checked to make sure the tabs are not touching. When all of this is done the motor housing is then reassembled.

Rewinding an electric motor is a monotonous and difficult procedure.  Unless you are experienced, having a professional perform the task will save you money and headache in the long run.  Priest Electric is a reliable service supplier trained in electric motor rewinding in Boise, Idaho, Nevada, and Oregon.  They have a full service shop for electric motor repair, and can also provide on-site service.

For more details visit:

Electrical Motor Rewinding